Super li · VSF claim · 11-photo dealer QC

VSF Submariner No-Date · 6W07B330

GL candidate · automated visual QC

S002 · Camera geometry corrected. Image rotated approximately 23.6° counterclockwise at the dial centre; perspective and unequal image scaling normalized to a circular dial reference using isolated printed minute strokes. Recentered and resampled to 1900 × 1900 pixels. No correction for crystal refraction or raised bezel/hand geometry. Extended rays are visual dial references only; they do not correct or measure the raised bezel.

RECOMMENDATION

Acceptable visible QC, with a small repeated luminous-baton offset most apparent at 6 o’clock, not a demonstrated major mounting defect. Dial layout, visible printing and hands show no compelling defect.

Dial layout and luminous-baton axes

Validated checks show small image-plane luminous-axis offsets: 3 o’clock approximately -0.5° to -0.8°, 6 o’clock -1.1° to -1.4°, and 9 o’clock 0.4° to 0.6°. Visible marker placement is otherwise coherent with the track. The repeated small 6 o’clock offset is acknowledged rather than described as perfectly straight.

S001 S002 S003

Printing, hands and date

Visible printing and hand outlines appear intact. Hands cover portions of text and the 4 o’clock marker; additional seconds-hand occlusion varies between views. A baton occupies 3 o’clock and no date window is visible. Covered characters do not support malformed-text claims.

S001 S002 S003

Bezel

Visible bezel numerals and neighboring ticks show no compelling local spacing defect. Upper sectors are reflective, and oblique views limit comparison. No consequential bezel defect is independently corroborated.

S001 S002 S003

Exterior finish

Visible dial-adjacent surfaces show reflections and protective material. Exterior source reviews describe film on the case, bracelet and clasp without identifying a specific persistent defect. No supported finish concern is established, but film-covered surfaces and exterior details supplied only through prose are not fully verified.

S001 S002 S004 S005 S006 S007 S008

Timegrapher snapshot

Rate +0 s/day; Amplitude 285 °; Beat error 0.1 ms; Lift angle 59 °; Beat rate 28800 bph Displayed amplitude depends on the selected lift angle; the correct setting for the installed movement is not verified. Winding, stabilization, position and recording duration are unknown. Two transcriptions of one source are not independent timing measurements.

S011

Red ring: printed dial-track reference. Red dashed rays continue the dial positions across the bezel for visual comparison only; they do not correct, measure or set a tolerance for the raised bezel or cyclops. Cyan crosshairs mark the dial’s cardinal axes. Green lines show released luminous-insert axes, and amber outlines show candidate reflective edges. Positive angles are clockwise; negative angles counterclockwise. Sensitivity ranges are not confidence intervals. Native close-ups preserve the source view.

Detail checks

S002 · Native full-bezel context. Raised bezel and pearl assessed visually in this original camera view

S011 · Full timegrapher source frame; screen-crop coverage is unverified. Readings describe this snapshot only.

Supporting dial views

Additional camera references

S001

Camera geometry corrected

S003

Camera geometry corrected

Position and angle checks

3 dial views · 36 checks

S002 · 1 o’clock

Round feature · position check; no unique axis · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Complete circular luminous insert with no occlusion.

S002 · 2 o’clock

Round feature · position check; no unique axis · centre offset +0.5° from clock ray (segmentation +0.5° to +0.5°) · image-plane only · Complete circular luminous insert with no occlusion.

S002 · 3 o’clock

-0.7° luminous image axis · sensitivity -0.7° to -0.6° · centre offset +0.3° from clock ray (segmentation +0.3° to +0.3°) · image-plane only · Complete rectangular luminous baton with no occlusion.

S002 · 4 o’clock

Round feature · position check; no unique axis · Circular luminous insert partially occluded by the minute hand tip.

S002 · 5 o’clock

Round feature · position check; no unique axis · centre offset +0.1° from clock ray (segmentation +0.1° to +0.1°) · image-plane only · Complete circular luminous insert with no occlusion.

S002 · 6 o’clock

-1.1° luminous image axis · sensitivity -1.2° to -1.1° · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Complete rectangular luminous baton with no occlusion.

S002 · 7 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (segmentation +0.3° to +0.4°) · image-plane only · Complete circular luminous insert with no occlusion.

S002 · 8 o’clock

Round feature · position check; no unique axis · centre offset +0.4° from clock ray (segmentation +0.3° to +0.4°) · image-plane only · Complete circular luminous insert with no occlusion.

S002 · 9 o’clock

+0.4° luminous image axis · sensitivity +0.4° to +0.5° · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Complete rectangular luminous baton with no occlusion.

S002 · 10 o’clock

Round feature · position check; no unique axis · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Complete circular luminous insert with no occlusion.

S002 · 11 o’clock

Round feature · position check; no unique axis · Circular luminous insert partially occluded by the seconds hand.

S002 · 12 o’clock

Triangular insert · centre placement; precise rotation unmeasured · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Complete triangular luminous insert with no occlusion.

S001 · 1 o’clock

Round feature · position check; no unique axis · centre offset +0.2° from clock ray (segmentation -0.1° to +0.2°) · image-plane only · Unoccluded round luminous marker cleanly isolated in mask.

S001 · 2 o’clock

Round feature · position check; no unique axis · centre offset +0.5° from clock ray (segmentation +0.5° to +0.5°) · image-plane only · Unoccluded round luminous marker cleanly isolated in mask.

S001 · 3 o’clock

-0.8° luminous image axis · sensitivity -0.9° to -0.6° · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Unoccluded horizontal rectangular luminous baton cleanly segmented.

S001 · 4 o’clock

Round feature · position check; no unique axis · Round luminous marker is partially occluded by the minute hand tip.

S001 · 5 o’clock

Round feature · position check; no unique axis · centre offset +0.1° from clock ray (segmentation +0.1° to +0.1°) · image-plane only · Unoccluded round luminous marker cleanly isolated in mask.

S001 · 6 o’clock

-1.2° luminous image axis · sensitivity -1.3° to -1.2° · centre offset +0.1° from clock ray (segmentation +0.1° to +0.1°) · image-plane only · Unoccluded vertical rectangular luminous baton cleanly segmented.

S001 · 7 o’clock

Round feature · position check; no unique axis · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Unoccluded round luminous marker cleanly isolated in mask.

S001 · 8 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (segmentation +0.3° to +0.3°) · image-plane only · Unoccluded round luminous marker cleanly isolated without hand interference.

S001 · 9 o’clock

+0.5° luminous image axis · sensitivity +0.5° to +0.5° · centre offset +0.4° from clock ray (segmentation +0.4° to +0.4°) · image-plane only · Unoccluded horizontal rectangular luminous baton cleanly segmented.

S001 · 10 o’clock

S001 · 11 o’clock

Round feature · position check; no unique axis · centre offset +0.4° from clock ray (segmentation +0.4° to +0.4°) · image-plane only · Unoccluded round luminous marker cleanly isolated in mask. · amber outlines are candidate reflective edges

S001 · 12 o’clock

Triangular insert · centre placement; precise rotation unmeasured · centre offset +0.3° from clock ray (segmentation +0.3° to +0.3°) · image-plane only · Unoccluded triangular luminous marker fully captured in mask.

S003 · 1 o’clock

Angle unverified · feature edges uncertain · Round luminous marker partially occluded by the seconds hand. · amber outlines are candidate reflective edges

S003 · 2 o’clock

Round feature · position check; no unique axis · centre offset +0.5° from clock ray (segmentation +0.5° to +0.6°) · image-plane only · Round luminous marker fully visible and unoccluded.

S003 · 3 o’clock

-0.5° luminous image axis · sensitivity -0.6° to -0.3° · centre offset +0.3° from clock ray (segmentation +0.3° to +0.3°) · image-plane only · Rectangular luminous baton fully visible and unoccluded.

S003 · 4 o’clock

Angle unverified · local axis not confirmed · Round luminous marker partially occluded by the minute hand.

S003 · 5 o’clock

Round feature · position check; no unique axis · centre offset -0.0° from clock ray (segmentation -0.0° to -0.0°) · image-plane only · Round luminous marker fully visible and unoccluded.

S003 · 6 o’clock

-1.4° luminous image axis · sensitivity -1.4° to -1.3° · centre offset +0.0° from clock ray (segmentation +0.0° to +0.0°) · image-plane only · Vertical rectangular luminous baton fully visible and unoccluded.

S003 · 7 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (segmentation +0.3° to +0.3°) · image-plane only · Round luminous marker fully visible and unoccluded.

S003 · 8 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (segmentation +0.3° to +0.4°) · image-plane only · Round luminous marker fully visible and unoccluded.

S003 · 9 o’clock

+0.6° luminous image axis · sensitivity +0.6° to +0.7° · centre offset +0.3° from clock ray (segmentation +0.3° to +0.3°) · image-plane only · Horizontal rectangular luminous baton fully visible and unoccluded.

S003 · 10 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (segmentation +0.2° to +0.3°) · image-plane only · Round luminous marker fully visible and unoccluded.

S003 · 11 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (segmentation +0.3° to +0.3°) · image-plane only · Round luminous marker fully visible and unoccluded.

S003 · 12 o’clock

Triangular insert · centre placement; precise rotation unmeasured · centre offset +0.2° from clock ray (segmentation +0.2° to +0.2°) · image-plane only · Downward-pointing triangular luminous marker fully visible and unoccluded.

Source gallery

11 photos · 0 videos

11 photos · 0 videos in the saved gallery. Repeated views are not independent confirmation.