Gallery QC

VSF Submariner 124060 - 6X08B103

RL candidate · confirm the reported defect

S003 · Camera geometry corrected. Image rotated approximately 0.0° clockwise at the dial centre; perspective and unequal image scaling normalized to a circular dial reference using isolated printed minute strokes. Recentered and resampled to 1900 × 1900 pixels. No correction for crystal refraction or raised bezel/hand geometry. Extended rays are visual dial references only; they do not correct or measure the raised bezel.

RECOMMENDATION

The 12 o’clock luminous triangle shows a small but clearly repeated clockwise lean in S002 and S003, including their native and corrected close-ups. 12 o’clock triangle: repeated buyer-relevant lean: Request a replacement for the supported cosmetic nonconformity to the buyer’s requirement.

12 o’clock triangle: repeated buyer-relevant lean

At hour 12 in both S002 and S003, the native luminous top edge slopes down toward the right. The corrected close-ups retain that slope, with the apex slightly left of the top-edge midpoint. The visible luminous boundaries support the outline rather than the reviews’ descriptions of a horizontal edge. The repeated edge evidence supports a small clockwise lean of the luminous insert, contrary to the supplied no-concern prose. Request a replacement for the supported cosmetic nonconformity to the buyer’s requirement.

S002 S003

Dial placement and local bar axes

The validated track references support generally orderly marker placement. Verified luminous axes show small image-only offsets: S003 hour 3 0.1° (sensitivity -0.1° to 0.1°), hour 6 0.6° (0.1° to 0.7°); S002 hour 3 -0.2° (-0.3° to -0.1°), hour 9 -0.5° (-0.7° to -0.4°). These are luminous-component axes, not metal-frame mounting angles.

S002 S003

Hands, printing and date configuration

Visible hands and luminous fill appear intact. The seconds hand crosses printing in S002; S003 provides a clearer view without supporting malformed lettering. The dial has no date aperture. No persistent hand or printing defect is established.

S001 S002 S003

Bezel and exterior finish

Native bezel views show legible graduations without a clearly repeated local spacing defect. Reflections and protective material limit inspection of exterior surfaces; the exterior reviews identify no persistent damage. No compelling bezel or finish issue is established.

S001 S002 S003 S006 S008 S010

Timegrapher snapshot

Video snapshot at 0s: Rate -1 s/day; Amplitude 250 °; Beat error 0.3 ms; Lift angle 52 °; Beat rate 28800 bph; Interval 12 s Displayed amplitude depends on the selected lift angle; the correct setting for the installed movement is not verified. Winding, stabilization, position and recording duration are unknown. Two transcriptions of one source are not independent timing measurements.

S012

Red ring: printed dial-track reference. Red dashed rays continue the dial positions across the bezel for visual comparison only; they do not correct, measure or set a tolerance for the raised bezel or cyclops. Cyan crosshairs mark the dial’s cardinal axes. Green lines show released luminous-insert axes, and amber outlines show candidate reflective edges. Positive angles are clockwise; negative angles counterclockwise. Sensitivity ranges are not confidence intervals. Native close-ups preserve the source view.

Detail checks

S003 · Native full-bezel context. Raised bezel features assessed visually in this original camera view

S003 · 12 o’clock triangular insert: native crop and corrected dial reference. Amber outline, when present, is a candidate luminous silhouette

S002 · 12 o’clock triangular insert: native crop and corrected dial reference. Amber outline, when present, is a candidate luminous silhouette

S012 · Full timegrapher source frame at 0s; screen-crop coverage is unverified. Readings describe this snapshot only.

Supporting dial views

Additional camera references

S002

Camera geometry corrected

Position and angle checks

2 dial views · 24 checks

S003 · 1 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (geometry + segmentation +0.2° to +0.3°) · image-plane only · Complete circular lume insert with no occlusions.

S003 · 2 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (geometry + segmentation +0.2° to +0.3°) · image-plane only · Clear circular luminous dot with intact frame.

S003 · 3 o’clock

+0.1° luminous image axis · sensitivity -0.1° to +0.1° (geometry + segmentation; not physical tilt) · centre offset +0.3° from clock ray (geometry + segmentation +0.3° to +0.4°) · image-plane only · Unobstructed rectangular luminous baton.

S003 · 4 o’clock

Round feature · position check; no unique axis · centre offset +0.1° from clock ray (geometry + segmentation +0.0° to +0.2°) · image-plane only · Fully visible circular luminous marker.

S003 · 5 o’clock

Round feature · position check; no unique axis · centre offset -0.1° from clock ray (geometry + segmentation -0.2° to -0.1°) · image-plane only · Uncovered circular luminous plot.

S003 · 6 o’clock

+0.6° luminous image axis · sensitivity +0.1° to +0.7° (geometry + segmentation; not physical tilt) · centre offset +0.1° from clock ray (geometry + segmentation -0.0° to +0.1°) · image-plane only · Vertical rectangular luminous bar without occlusion.

S003 · 7 o’clock

Round feature · position check; no unique axis · centre offset -0.2° from clock ray (geometry + segmentation -0.3° to -0.2°) · image-plane only · Complete round luminous dot.

S003 · 8 o’clock

Round feature · position check; no unique axis · centre offset -0.2° from clock ray (geometry + segmentation -0.3° to -0.2°) · image-plane only · Round luminous marker fully captured.

S003 · 9 o’clock

Angle unverified · local axis not confirmed · Lower edge slightly occluded by the seconds hand.

S003 · 10 o’clock

Round feature · position check; no unique axis · centre offset -0.1° from clock ray (geometry + segmentation -0.1° to +0.0°) · image-plane only · Unobstructed circular luminous dot.

S003 · 11 o’clock

Round feature · position check; no unique axis · centre offset -0.1° from clock ray (geometry + segmentation -0.1° to -0.0°) · image-plane only · Intact circular luminous plot.

S003 · 12 o’clock

Triangular insert · centre placement; precise rotation unmeasured · centre offset +0.2° from clock ray (geometry + segmentation +0.1° to +0.2°) · image-plane only · Luminous coverage verified; this is not a straightness pass. · Final triangle finding: 12 o’clock triangle: repeated buyer-relevant lean. At hour 12 in both S002 and S003, the native luminous top edge slopes down toward the right.

S002 · 1 o’clock

Angle unverified · local axis not confirmed · Round lume marker partially occluded by the seconds hand.

S002 · 2 o’clock

Round feature · position check; no unique axis · centre offset +0.3° from clock ray (geometry + segmentation +0.2° to +0.3°) · image-plane only · Unobstructed circular luminous marker with clean mask.

S002 · 3 o’clock

-0.2° luminous image axis · sensitivity -0.3° to -0.1° (geometry + segmentation; not physical tilt) · centre offset +0.4° from clock ray (geometry + segmentation +0.3° to +0.5°) · image-plane only · Unoccluded rectangular luminous baton with complete segmentation.

S002 · 4 o’clock

Round feature · position check; no unique axis · centre offset +0.2° from clock ray (geometry + segmentation +0.1° to +0.3°) · image-plane only · Fully visible circular lume insert without obstruction.

S002 · 5 o’clock

Round feature · position check; no unique axis · centre offset +0.0° from clock ray (geometry + segmentation -0.0° to +0.1°) · image-plane only · Clear circular luminous plot with intact boundaries.

S002 · 6 o’clock

Angle unverified · feature edges uncertain · Vertical rectangular luminous baton unobstructed.

S002 · 7 o’clock

Round feature · position check; no unique axis · centre offset -0.1° from clock ray (geometry + segmentation -0.2° to -0.1°) · image-plane only · Round luminous marker completely captured without overlap.

S002 · 8 o’clock

Round feature · position check; no unique axis · centre offset -0.2° from clock ray (geometry + segmentation -0.3° to -0.2°) · image-plane only · Circular lume marker fully visible and cleanly masked.

S002 · 9 o’clock

-0.5° luminous image axis · sensitivity -0.7° to -0.4° (geometry + segmentation; not physical tilt) · centre offset +0.0° from clock ray (geometry + segmentation -0.0° to +0.0°) · image-plane only · Horizontal luminous baton unobstructed with complete mask.

S002 · 10 o’clock

Round feature · position check; no unique axis · centre offset -0.2° from clock ray (geometry + segmentation -0.2° to +0.2°) · image-plane only · Unoccluded round luminous marker accurately isolated.

S002 · 11 o’clock

Round feature · position check; no unique axis · centre offset -0.2° from clock ray (geometry + segmentation -0.3° to -0.2°) · image-plane only · Intact circular lume plot with no foreground interference.

S002 · 12 o’clock

Triangular insert · centre placement; precise rotation unmeasured · centre offset -0.0° from clock ray (geometry + segmentation -0.0° to +0.0°) · image-plane only · Luminous coverage verified; this is not a straightness pass. · Final triangle finding: 12 o’clock triangle: repeated buyer-relevant lean. At hour 12 in both S002 and S003, the native luminous top edge slopes down toward the right.