Gallery QC

VS 41无历黑水鬼 6X08B252

GL candidate · automated visual QC

S004 · Camera geometry corrected. Image rotated approximately 0.4° counterclockwise at the dial centre; perspective and unequal image scaling normalized to a circular dial reference using isolated printed minute strokes. Recentered and resampled to 1900 × 1900 pixels. No correction for crystal refraction or raised bezel/hand geometry. Extended rays are visual dial references only; they do not correct or measure the raised bezel.

RECOMMENDATION

Visible QC is acceptable in these photos. Dial placement is coherent; the 6 and 9 o’clock luminous bars show small image-only axis offsets, not established mounting defects.

Dial placement and luminous-bar axes

S004 shows small luminous-component axis offsets: 6 o’clock 0.8° (geometry-plus-segmentation sensitivity 0.8° to 0.9°), and 9 o’clock -1.2° (-1.3° to -1.1°). Separately, placement offsets are 0.1° (0.1° to 0.1°) and -0.7° (-0.7° to -0.5°), respectively. Native edges are consistent with small offsets, and the overall layout remains coherent in S006 and S009. These are image-only luminous-component results, not metal-frame mounting angles or factory tolerances.

S004 S006 S009

12 o’clock triangle orientation

In S004's native close-up and corrected reference, the frame and luminous insert have approximately level upper edges and balanced sloping edges. The apex is close to the dial ray; bright edging near the tip is asymmetric. S006 and S009 do not show a convincing repeated lean. The edge evidence supports the supplied no-visible-concern review, though its claim of exact symmetry is stronger than the pixels warrant.

S004 S006 S009

Hands, printing and date

Visible hand outlines and luminous fills appear intact. Hands obscure portions of the lower dial text in S004, S006 and S009; this does not establish malformed lettering. No date aperture is present. Visible hand and print QC is acceptable.

S004 S006 S009 S019

Raised bezel

The native S004 bezel view shows intact visible numerals, ticks and the luminous zero insert. Local numeral-to-tick spacing does not show a convincing irregularity corroborated by S009 or S019. No consequential bezel defect is established.

S004 S009 S019

Exterior finish beneath coverings

Wrinkled protective film and protective pieces cover bracelet, case and caseback areas. Exposed surfaces show no compelling repeated damage. The repeated concern is genuine occlusion, not evidence of damaged metal.

S008 S019 S014 S017

Timegrapher snapshot

Rate +9 s/day; Amplitude 252 °; Beat error 0 ms; Lift angle 52 ° Displayed amplitude depends on the selected lift angle; the correct setting for the installed movement is not verified. Winding, stabilization, position and recording duration are unknown. Two transcriptions of one source are not independent timing measurements.

S020

Red ring: printed dial-track reference. Red dashed rays continue the dial positions across the bezel for visual comparison only; they do not correct, measure or set a tolerance for the raised bezel or cyclops. Cyan crosshairs mark the dial’s cardinal axes. Green lines show released luminous-insert axes, and amber outlines show candidate reflective edges. Positive angles are clockwise; negative angles counterclockwise. Sensitivity ranges are not confidence intervals. Native close-ups preserve the source view.

Detail checks

S004 · Native full-bezel context. Raised bezel features assessed visually in this original camera view

S004 · 12 o’clock triangular insert: native crop and corrected dial reference. Amber outline, when present, is a candidate luminous silhouette

S020 · Full timegrapher source frame; screen-crop coverage is unverified. Readings describe this snapshot only.

Position and angle checks

1 dial views · 12 checks

S004 · 1 o’clock

Round feature · position check; no unique axis · centre offset -0.0° from clock ray (geometry + segmentation -0.1° to -0.0°) · image-plane only · Round lume plot clear of occlusion.

S004 · 2 o’clock

Round feature · position check; no unique axis · centre offset -0.0° from clock ray (geometry + segmentation -0.0° to +0.0°) · image-plane only · Round lume plot clear of occlusion.

S004 · 3 o’clock

Angle unverified · local axis not confirmed · Elongated baton partially occluded by the minute hand.

S004 · 4 o’clock

Round feature · position check; no unique axis · centre offset -0.0° from clock ray (geometry + segmentation -0.1° to +0.4°) · image-plane only · Round lume plot clear of occlusion.

S004 · 5 o’clock

Round feature · position check; no unique axis · centre offset -0.1° from clock ray (geometry + segmentation -0.1° to +0.3°) · image-plane only · Round lume plot clear of occlusion.

S004 · 6 o’clock

+0.8° luminous image axis · sensitivity +0.8° to +0.9° (geometry + segmentation; not physical tilt) · centre offset +0.1° from clock ray (geometry + segmentation +0.1° to +0.1°) · image-plane only · Rectangular baton clear of occlusion.

S004 · 7 o’clock

Angle unverified · feature edges uncertain · Round marker with inverted or incomplete mask fill.

S004 · 8 o’clock

Round feature · position check; no unique axis · centre offset -0.4° from clock ray (geometry + segmentation -0.4° to -0.2°) · image-plane only · Round lume plot clear of occlusion.

S004 · 9 o’clock

-1.2° luminous image axis · sensitivity -1.3° to -1.1° (geometry + segmentation; not physical tilt) · centre offset -0.7° from clock ray (geometry + segmentation -0.7° to -0.5°) · image-plane only · Rectangular baton clear of occlusion.

S004 · 10 o’clock

Round feature · position check; no unique axis · centre offset -0.1° from clock ray (geometry + segmentation -0.4° to -0.1°) · image-plane only · Round lume plot clear of occlusion.

S004 · 11 o’clock

Round feature · position check; no unique axis · centre offset -0.1° from clock ray (geometry + segmentation -0.1° to -0.1°) · image-plane only · Round lume plot clear of occlusion.

S004 · 12 o’clock

Triangular insert · centre placement; precise rotation unmeasured · centre offset +0.4° from clock ray (geometry + segmentation +0.4° to +0.4°) · image-plane only · Luminous coverage verified; this is not a straightness pass. · Final triangle finding: 12 o’clock triangle orientation. In S004's native close-up and corrected reference, the frame and luminous insert have approximately level upper edges and balanced sloping edges.

Source gallery

20 photos · 0 videos

20 photos · 0 videos in the saved gallery. Repeated views are not independent confirmation.