CHEN · RICH V2 / JH3230 claimed

RICH Submariner 124060 · P17337Q2

GL candidate · automated visual QC

S002 · Camera geometry corrected. Image rotated approximately 0.6° clockwise at the dial centre; perspective and unequal image scaling normalized to a circular dial reference using the printed ticks’ inner tips. Recentered and resampled to 1900 × 1900 pixels. No correction for crystal refraction or raised bezel/hand geometry. Extended rays are visual dial references only; they do not correct or measure the raised bezel.

RECOMMENDATION

GL candidate on visible QC. The dial reference now validates; request a fully wound timing recheck.

Dial and marker alignment

The front photo passes the printed-track checks. The curve follows the inner tick tips, including the shortened ticks near SWISS MADE. The 6 o’clock luminous axis reads −1.2° (threshold sensitivity −1.5° to −0.8°); this is an image measurement, not a confirmed mounting defect. Numerical checks at 3 and 9 remain withheld because the luminous inserts are not cleanly isolated.

S002 · supporting views S003–S007

Hands, bezel and lume

No confirmed hand damage or bezel defect. Reflections limit inspection of the raised pearl; the dial correction does not apply to it. A short setting/running video would check hand function and clearance. Lume illumination is shown, not its duration.

S002 · S003 · S004 · S007

Case, bracelet and movement

Film, stickers and reflections obscure parts of the finish; apparent marks are not confirmed scratches. Movement photos and labels do not independently establish the claimed factory or installed calibre.

S008–S016

Timing

S018 reads +10 s/day, 244° amplitude, 0.0 ms beat error at a 52° lift-angle setting. Winding, stabilization, test duration and the correct lift angle are unknown. Request a fully wound, stabilized recording and additional positions before judging regulation or movement health.

S018

Red ring: printed dial-track reference. Red dashed rays continue the dial positions across the bezel for visual comparison only; they do not correct, measure or set a tolerance for the raised bezel or cyclops. Cyan crosshairs mark the dial’s cardinal axes. Green lines show released luminous-insert axes, and amber outlines show candidate reflective edges. Positive angles are clockwise; negative angles counterclockwise. Sensitivity ranges are not confidence intervals. Native close-ups preserve the source view.